ESPECTACULAR :)

lokking great, allow me to use..thks

These are great - and versatile too. many thanks

Thanks, enjoy.

:O!!!!!
wow i've been searching for a great font like this!!
thank you so much

Are your fonts CU ok?

nikki, I do not know what CU means. Could you explain? Thanks.

Michael - great font. I'm starting a small business and am interested in licensing this font for a logo. (I'm just starting out and I'm making no money, so don't get too excited!) How do I reach you?
Thanks,
Mary

Mary, the font is free to use for what ever you wish - for free. If you feel inclined there is a PayPal donation link on the Michael Tension page (you will find a link on the red bar at the top of this page). No pressure, it’s your choice. Good luck with the new business.

the file are the same! someone knows where we can find the reversed one?

Sorry, I meant Commercial Use.

Nikki: CU... seems very obvious to me now.

stefanojoomlai: I just downloaded the font too see if it had both versions and it did. I built the files to have the reversed show up in a font menu like bold or italic would. It shouldn’t be listed as two fonts. Maybe have a look there?

I love this font, however when I try to use the regular font (not the reversed) it shows up in half? You can only ever see half the letters... I believe I had this font installed on my old computer and it worked fine, I don't understand why it'll only write, cut in half...anyone know what the problem could be or how I could fix it? Thanks!

Susanna-Cole: what program/softwear are you using?

Thanks for getting back to me! And oh, just a free software, called Paint.net... maybe the program is the problem? Because I used Paint Shop Pro 7 prior to this, and if I remember, the font worked fine with PSP7...

Susanna-Cole: I figured it may be the program not knowing what to do with height of the characters. I am new at making fonts an do not know how I could fix this. Sorry I couldn’t be more helpful.

That's okay, I appreciate you replying anyhow, and now that I think about it, I actually could just use the old family computer (which still has PSP7 on it) for a few minutes to add in your font on the graphic I'm working on! :)

Reversed sems to be the way to go for me...!

Thank you so much for making this font. You helped me a lot. mostly with the awesome factor.

Thank you very much!

I'm trying to download but the file ext is efw and not ttf. So I cant install it. Any thoughts on why?

Loving this font mate! Whenever I've been skimming the top 100 fonts on here recently this font always jumps out at me!

Mind if I make use of this in a t-shirt design?

stonee31: I am not sure why the extension would change. I just emailed you the .ttf files.

ugghhzilla: Glad you like the fonts, and thanks for saying so. Go ahead and use them for whatever you like.

Love the font. Thanks. Having small problem though, if I install both fonts I can only access "reversed" through PS CS2. If I delete "reversed" I can then access "regular". I'd like to have both, any idea why this is happening? Thanks.

The font is set up so when both are installed reversed shows up like an italic or bold would in a font family. Install them both and change regular to reversed. Hope that makes sense.

Just wanted to let you know that this font is excellent; exactly what I needed for my final year project. Thanks a lot!

Thanks for letting me know Yak, I really appreciate getting feed back.

Hello again. Just realized I'm having the same problems as others installing the two and using them simultaneously. Could you please explain in a little more detail how you change regular to reversed? I'm using Windows.

If both font files are installed they will shop up as just Impact Label (1 font) in the font list. Don’t think of it as two different fonts, reversed is just another style from the same font family (you change the style in the second menu e.g. roman to bold or italic etc). I hope this is helpful.

The menu shows regular and reversed, but they both come out the same: currently I have both installed. When you choose "reversed" it shows up reversed like it should, but if I try to use "regular", it looks like the reversed one too, so both options are the same. If I delete Reversed from the font library then Regular kicks back in, but it seems you can't use both at the same time. :(

Sorry to hear that Yak, I don’t know what to recommend, it works fine for me in Adobe soft wear and that is really all I use. What are you using? Are you on a Mac or PC?

I use Adobe software too - mainly InDesign CS3 at the moment - but on Windows. Do you use a Mac? Maybe it's a matter of platform incompatibility?

Yeah, could be Yak. Unfortunately I do not have years of experience creating fonts to trouble shoot from. I will see if I can Google some answers and get post what I find. Best I can do I’m afraid.

It's all good. I reckon most people will only really use Impact since the reverse looks like a typewriter anyway.

Thanks again for the font!

Lacks "Çç"

This is a great font! I'm trying to get the Impact Label but I only get reversed. Why is this?

Never mind, now it only shows up as Impact Label, which is what I wanted lol thanks anyways haha

Muchas gracias...estaba buscando esta tipografia, me sirve mucho. Saludos desde argentina

Thank you very much ... I was looking for this font, I need a lot. Greetings from argentina

Greetings from
argentina

You’re welcome toronjaespacial. dilmo22: maybe I will update the font in the future and add some more characters

Great font! Thanks so much! I wanted to mention for those who are only seeing half of the letters - I'm using Paint Shop Pro and when I changed the "stroke width" to 0, half of each letter disappeared. When I change the stroke width to 1, it works fine. Hope that helps someone!

I got some help from http://www.fontsquirrel.com/ with my font files (which they fixed for me, thanks!)so I will be submitting an update that should end the troubles PC users are having with this font set. Thanks for being patient!

Hi. Am really loving this font and am asking you if i could possibly use it for my business. what are your feelings.

fdundon, sure you can. Enjoy.

Fantastic font! Too bad you didn't include the letter Å, though..

Linnizes: Unfortunately speaking only English, it is very easy for me to miss characters that are important to other languages. Let me know of any more that would make this face complete and I will ad them to the font. Cheers.

Great font man! If you could just add a few more letters - Č, Ć and Đ. Thanks!

Well, how about we get everybody to request what characters are needed, and I will make one complete font for all I can.

nice font) i think i saw it in a jack jones store...

Stefan, cool, wish I had seen that. Thanks.

esto es un plagio?

http://new.myfonts.com/fonts/fontfont/ff-dynamoe/

RAS-UTOPIA, it is not a copy. It is a more modern Dymo. Looks pretty good.

http://www.fonts.com/FindFonts/detail.htm?pid=418262

MT: Rockin' font! Great resolution and sizing. Many thanks for a full character chart, too. Was able to use your Impact Label to replace four similar, but underperforming fonts. Access to punctuation, accents, and common symbols your big advantage. Dymo pales in your might shadow!

Was able to install the Impact Label family with zero problems on my Mac PowerBook G4, running Tiger (OS X 10.4.11). For Mac'ers using Font Book app., the TTF files will install as two separate fonts rather than 1 family, but no usage or appearance issues whatsoever.

Correction to my comment:

DYMO PALES IN YOUR :::MIGHTY::: SHADOW! ;-)

NEON TANGO: thanks for taking the time to share your enjoyment of my font. Cheers!

Amazing fonts especially Impact label!

was gonna say looks like ff dynamoe but someone already beat me to it. darn it! D:

Pi Luo, Dynamoe is a square letter version of a DYMO label. Quite different really. It’s like comparing Helvetica to Eurostyle. In my mind it is great to have some choices. Thanks for commenting.

Michael,

You do some great work! Excellent stuff! I am trying to use the Impact Label in Microsoft Publisher and embed it. After embedding the font, and reopening the document it keeps stating "preview-only font" as if there is some restriction on the font. Do know what might be causing this to happen?

Thanks!

earle, I am not sure what would cause this. i will look at my source file, but I am pretty sure embedding is allowed. Thanks for your comment.

I guess it is very special. I wouldn't use it everywhere, only to emphasize some bad emotions. You know there is a song Come Thou Font by Jordan Bluth (I downloaded it once at music SE http://mp3hounddog.com ). I think we can express our thoughts and emotions not only with words but with fonts too.

Dear MTension: I'm getting 'tense'...trying to download youre awesome Impact font. I keep getting an 'invalid' message when I try to open the downloaded file and there's not .ttf file there (I've been able to successfully download other fonts...what am I doing wrong here). I'm on a PC. Would love your guidance...BTW...AWESOME FONT! :)

Very nice font! Please let me know if I can use it for commercial purposes?

thanks!

Registered just so I could tell you how much I absolutely love this font. Great job, can't wait to use it!

Ib22: yup, you can use the font commercially. See the included license for the details.
inkerbel: Thanks, that’s very cool of you to do that. I appreciate the support.

Does the licence allow for web use?

Love this font, ever since I upgraded to windows 7 and photoshop/illustrator cs5, I can no longer use it? it doesn't appear all that shows in my font folder is "reversed" but doesn't work. Any suggestions?

ta5h: Its the first time I have heard of this. I use cs5 on a Mac and it works fine. Try downloading the file again? Or, I can email an open type file and see if that works.

I love your font as well, but have a problem with it: the fonts itself are transparent. Is there any possibility, not only to change the color of the "tape", but also of the fonts, or at least make them solid white?

Mtension, congrats for this font! unfortunately is not working in windows 7. Im using CS4 and I can't use reversed option.
Suggestions are welcome!
Thank you!

Everything works brilliantly in win7 CS5 for me.

But this is a trip: I am using this font with the @font-face CSS declaration on a website and it diplays very differently in webkit browsers on my windows machine - the bottom part of what would be the plastic sticker stuff below the actual letter form is shaved off. Still legible but line height is shorter. Totally normal in all other browsers, totally normal in ALL browsers on linux machine, totally normal everywhere else. Anyone else seen this? the url is beatervillecafeandbar.com. I'd love to hear from anyone out there who has insight...

Can’t help you there, sorry.

I always have trouble creating a "space" between words with label-like fonts, so that the words appear on a single strip. What am I doing wrong?

Pretty sure I designed the font to have a black strip when you use the space bar. Not sure why it doesn't work for you.

Absolutely loved your font, but everytime i download it, i keep getting an error :( Could you please tell me if there's any solution? I'll appreciate it very much!

I would need to know what platform you are running (Windows vs OS X) and what the error message is.

Hello, I would like to use this font for commercial purposes. I m creative invitation craft. How much is it?
(I started, and it's a very small company, don't be too greedy please!)

Thank you.
      Clarisse M.

Clarisse M: whatever amount you feel is fair (or can afford) if fine for commercial use. Thank you for asking. Cheers.

hands up to all the 5sosfam here

hi, im a student and plaanning to sell shirts. i wanted to use your font coz it's amazing. is it ok for commercial use? though i dont have credit cards. how do i reach you?

monicnic: you can email me at: tension@gmail.com glad you like the font :)

Auto corrected :( email: mtension@gmail.com

Hi This font is exactly what I'm looking for but whenever i use it I get a white line between each letter. Am I doing something wrong, I'm using ps6

ok I figured it out, my av spacing was at the wrong setting. Thanks for font

hello, we would love to use this font for our upcoming back to the future day promo. Can you please get in contact with me to let us know whether we need to obtain a license and if so what fee would be involved. inna.trinidad@kaplan.com

Hello, I've just dropped an e-mail at mtension@gmail.com, coming from rickymay@hotmail.it address.
Could you please answer me back asap?

Many thanks in advance

Hi, I've been looking for such a font for a long time -- I'm so glad, I've finally found it! It's amazing. I've just got one question: in your images, the letters are really centred inside the black parts, from all sides. Yet, when I use it (Word), the white letters stick at the bottom of the black part, leaving a bigger space of black at the top. Do you have an idea why that is? Thanks!

Thank you for sharing. This is such a great font.

I will remember you for my Fonts~Label:lol.

Thanks mtension

You’re very welcome!